Description
Water based ink for textile printing. Opaque series with matt finish.
Direct textile printing. For finished or pre-cut garments.
APPLICATION PROCESS: Substrates Cotton, White & colored Threads/cm Max. 43 (108 Th/inch) Emulsion o ZERO IN Universal o ZERO IN Blue Squeegee Variable profile and shore to suit any print finish Curing At room temperature for 72 hours Thinner If necessary add max 2% water Thickening agent If necessary add max 1% TEXILAC ADDENSANTE 346 NEW Retarder If necessary add max 3% TEXILAC RITARDANTE Fixing agent 2% ECOTEX Fix 50 Cleaning Water or SCREENCLEAN ST Storage o Avoid direct sunlight o Keep at temperature between 15-35°C Pack See table for products range Safety Data Sheet Available upon request
PREPARATION: Colours can all be mixed in any proportion: we recommend not to mix more than 3 bases. If adding TEXILAC RITARDANTE it may require longer times by drying at room temperature and reduce the general fastnesses. Addition of ECOTEX FIX 50 (2%) is required whenever printing is carried out onto a fabric which is not 100% cotton and when we want to get the highest result in terms of general fastnesses on 100% cotton fabric.
The ink catalyzed with ECOTEX FIX 50 has a pot life of 812 hours. Once this time has elapsed the ink can be catalyzed another time.
APPLICATION: For top opacity and brightness of the colours, we recommend to regulate at best the out-of-contact and the squeegee pressure so as to get a superficial ink film rather than one penetrating the substrate. The ink is not suitable for printing wet on wet.
CURING: Drying at room temperature for 72 hours allows to get washing fastness at 40°C. A further passage of the dried print in a dryer at 100°C enables to attain better general fastnesses.
EQUIPMENT
Suitable for use with semi-automatic and automatic equipments.
SPECIAL INSTRUCTIONS
• Always test the print characteristics before running production.
• Always check curing conditions. Adding of additives could require longer time.
• The inks do not resist dry-cleaning and bleaching.
• TEXILAC MONO A FREDDO can not be mixed with other TEXILAC series or water base inks.




Reviews
There are no reviews yet.